 |
 |
Browse1.8T 'Plug and Play' Engine Management Kit
£850.00
Do you have the ability to fit and plumb your 1.8T engine but are put off by the complexities and pitfalls of installing the engine management system? If so the QPEng 'Plug and Play' EMS kit could be the solution you have been looking for
Product Details... 1.8T DIY Engine Management Kit
£600.00
Based on the QPEng 'PnP' engine management systems, this DIY version includes the same premapped race proven MBE 992 ECU and 3 bar MAP sensor, but allow the user to modify their own wiring harness using the plugs and instructions provided.
Product Details... 1.8T Retrofit In-Car 2-Stage Boost Control Kit
£30.00
This kit allows owners of the 1.8T 'Plug and Play' engine management kits ordered without the 2 stage in-car boost control to upgrade. The kit plugs into the exisiting 1.8T PnP harness and includes a dash mounted switch.
Product Details... 2 Pin Plug for Golf 2/3 and Corrado Temp Gauge
£4.00
2 Pin male plug that allows connection to the coolant temp gauge sender plug on Golf 2/3 and Corrado harnesses. Complete with pins and seals.
Product Details... 2.5" Stainless Steel Double Ended Sleeve
£7.00
With an ID of 63.5mm the double ended sleeve slips over any 2.5" exhaust pipe, allowing easy connection of downpipes 2.5" exhausts that have no flared end section.
Product Details... 2.5" Stainless Steel Downpipe for K03/K03s Turbo into Golf 1
£220.00
£176.00 You Save: 20.00% 
This version of conversion downpipe is suitable for fitting any 1.8T engine with a K03 or K03s turbo into Mk1 Golf/Cabrio, Mk1 Jetta and all Sciroccos.
Product Details... 2.5" Stainless Steel Downpipe for K03/K03s Turbo into Golf 2/3
£200.00
£160.00 You Save: 20.00% 
This version of conversion downpipe is suitable for fitting any 1.8T engine with a K03 or K03s turbo into Mk2 and 3 Golfs, plus Corrados and Mk2 Seat Ibiza.
Product Details... 2.5" Stainless Steel Downpipe for K04 Turbo into Golf 2/3
£250.00
£200.00 You Save: 20.00% 
This downpipe is suitable for fitting any 1.8T engine with a K04 turbo into Mk2 and 3 Golfs, plus the Corrado and Mk2 Seat Ibiza. It features a 2 piece design that allows easy fitment with the full engine and running gear in place.
Product Details... 2.5" to 2.25" to 2" Stainless Steel Stepped Adaptor
£10.00
****NEW DESIGN****
The stepped adaptor is produced from stainless steel and allows the range of QPEng downpipes to be connected to almost any exhaust system.
Product Details... 3 Pin Plug for Golf Mk3 2.0 2E Throttle
£6.00
3 pin plug for Golf Mk3 2.0 2E throttle. Includes pins and seals.
Product Details... 4 Pin Lambda Sensor Plug
£6.67
4 pin lambda sensor plug to suit late VAG narrow band sensors. Includes pins and seals
Product Details... 5 Pin 8v Digifant Power Plug
£9.00
Genuine VW Male Digifant Power Plug Complete with Pins and Seals
Product Details... 6 Pin G60 Digifant Power Plug
£9.00
Genuine VW Male 6 Pin G60 Digifant Power Plug complete with pins and seals
Product Details... 8 Pin AGU/AGG/ADY Throttle Plug
£9.00
8 pin plug for 1.8T AGU and 2.0 8v AGG/ADY throttle. Includes 3 pins and seals and 5 blanking plugs.
Product Details... Bulkhead Grommet for Golf 1/2 (46mm)
£7.00
Genuine VW Mk2 Golf bulkhead grommet for engine management harness.
Product Details... Bulkhead Grommet for Golf 3/Corrado (52mm)
£7.00
Rubber bulkhead grommet for Golf 3/Corrado engine management wiring.
Product Details... CAN-USB Interface Mapping Box and Easimap 5 Software for 992 ECU
£200.00
The interface box allows the connection of the 992 to your laptop via the USB port enabling anything from small tweaks to an existing calibration to full reprogramming of the unit.
Product Details... ECU CAN Communications Plug
£3.00
Sturdy chrome plated plug used on the engine harness to connect the CAN-USB interface box
Product Details... GM Type 3 bar MAP Sensor
£60.00
This 3 bar MAP sensor is suitable for forced induction applications with up to 2 bar boost pressure.
Product Details... Golf Mk1, 2 and 3 2.0 TFSI 'Plug and Play OEM' Engine Management
£850.00
Do you have the ability to fit and plumb your 2.0 TFSI engine but are put off by the complexities and pitfalls of installing the engine management system? If so the QPEng 'Plug and Play OEM' EMS kit could be the solution you have been looking for.
Product Details... MBE 970 ECU
£700.00
The flagship controller from MBE. This unit has many advanced features
Product Details... MBE 992 ECU with Internal Ignition Output Stage
£500.00
This version of the 992 ECU has the ignition output stage within the ECU. Use this type of ECU with the 3 pin VAG ignition coils.
Product Details... MBE 992 ECU without Ignition Output Stage
£500.00
This version of the 992 ECU has no internal ignition output stage. Use this type of ECU with the 4 pin VAG ignition coils.
Product Details... Plug Kit for GM 3 bar MAP Sensor
£7.00
Plug kit for GM MAP sensor - comprises housing, plus 3 pins and seals
Product Details... TFSI Sports Pack - Retrofit Upgrade
£200.00
Retro-fit the Sports Pack to your TFSI 'Plug and Play OEM' Kit to give adjustable power and throttle response while on the move
Product Details...
Results 1 - 29 of 29 Featured Products2.5" Stainless Steel Downpipe for K04 Turbo into Golf 2/3£250.00£200.00 You Save: 20.00% This downpipe is suitable for fitting any 1.8T engine with a K04 turbo into Mk2 and 3 Golfs, plus the Corrado and Mk2 Seat Ibiza. It features a 2 piece design that allows easy fitment with the full engine and running gear in place. 2.5" Stainless Steel Downpipe for K03/K03s Turbo into Golf 1£220.00£176.00 You Save: 20.00% This version of conversion downpipe is suitable for fitting any 1.8T engine with a K03 or K03s turbo into Mk1 Golf/Cabrio, Mk1 Jetta and all Sciroccos. Recently Viewed Products |
Store'Plug and Play' and 'Plug and Play OEM' Engine Management Kits 1.8T 'DIY' Engine Management Kits ECUs and Accessories 1.8T Conversion Downpipes
  |
||||||||
